Writing · Comparison
Good Display vs Waveshare: which e-paper supplier for a product?
Choose Good Display when you are designing a product around a specific e-paper panel and need its full specification and a supplier conversation. Choose Waveshare when you want a working prototype this week, with a driver HAT, example code and a price on the page. Many teams reasonably use both. On the 7.3-inch Spectra 6 panel the published specs are close, so the decision rests on documentation, revision control and how you plan to buy at volume.
Published 2026-11-22. Disclosure: our reference hardware is built on Good Display’s GDEP073E01 and GDEP133C02 panels and their ESP32 driver boards, so weigh our view accordingly. The figures below come from each company’s own public pages as read on that date. We have not run a side-by-side bench test of the two 7.3-inch products, and we did not obtain volume quotes from either.
Good Display vs Waveshare at a glance
The fairest comparison is one panel class from both catalogs: the 7.3-inch, 800 × 480 E Ink Spectra 6. Sources: GDEP073E01, ESP32E6-E01, Waveshare HAT (E) and its manual.
| Good Display | Waveshare | |
|---|---|---|
| Example part | GDEP073E01 panel; ESP32E6-E01 board | 7.3inch e-Paper (E); HAT (E) with driver board |
| Panel | 7.3″ Spectra 6, 800 × 480 | 7.3″ Spectra 6, 800 × 480 |
| Listed full refresh | 15 to 22 s | 25 s |
| Listed operating temp | 0 to 50 °C | 0 to 50 °C in the table; 0 to 40 °C in the FAQ |
| Listed storage temp | -25 to 60 °C | -25 to 60 °C |
| Driver hardware | ESP32-S3 board with IP5306 charging, battery not included | Driver HAT for a host: Pi, Jetson, Arduino, STM32 |
| Published price | None usable on the pages we read; request a quote | $57.99 to $77.99 |
| Documentation | Panel spec PDF, usage guidelines, inspection standard, sample code | Wiki manual, schematic, user manual, example code |
| Volume route | Custom development support; contact the company | Large-quantity discount, customization and distributor pages |
| Best first use | A product built around a specific panel | A fast prototype or small batch |
Do not read the refresh row as a speed test. The two figures are vendor listings, measured under conditions the pages do not state, and refresh time changes with temperature and waveform. Measure it on your own build.
Waveform (LUT): The timed voltage sequence that moves the pigment particles to a target color. It decides image quality, refresh time and how the panel behaves at different temperatures, and it is often stored in one-time-programmable memory on the panel’s driver IC.
Where Good Display is the better fit
Panel-level documentation
Good Display publishes a specification, usage guidelines and an inspection standard for the GDEP073E01. An independent embedded engineering reference describes its datasheets as more detailed than Waveshare’s, including on waveform LUTs, and calls the company one of the larger E Ink panel OEMs. If your firmware engineer needs to understand timing rather than just run a demo, that matters.
Waveform and calibration support
Good Display says it tunes waveform files to each film’s Vcom characteristics and stores calibrated waveforms in OTP before shipment, with adjustments possible for high or low temperature environments. That is a vendor claim. If you depend on it, ask what they will do for your application and get it in the supply agreement.
A board closer to a product
The ESP32E6-E01 puts an ESP32-S3 and an IP5306 lithium charging circuit next to the 50-pin Spectra 6 connector, which is much closer to a battery product than a HAT on a Raspberry Pi. It is the board we build on for 7.3 inches; our dev-kit-to-product checklist covers what still has to change before field units ship.
Where Waveshare is the better fit
Speed to a first image
Waveshare’s HAT version arrives with the driver board, cables and standoffs, and the listing covers examples for Raspberry Pi, Jetson Nano, RDK X3, Arduino and STM32. If your software team already works in Python on a Pi, that is the shortest path to seeing your content on the panel.
Simple purchasing
A public price, a checkout and a listed 12-month warranty make small orders straightforward, with no quoting step for the first few units. Waveshare also sells the bare panel separately, and its range runs from small modules up to 13.3 inches, as Soldered’s comparison notes (Soldered sells a competing product, so we took only the catalog facts from it).
Plain-language precautions
Waveshare’s manual is unusually direct about what damages a panel: long periods powered without sleeping, strong light, and storage beyond its limits. Those notes are useful whichever supplier you choose, and we quote them in our guide to e-paper in direct sunlight.
What to verify with either supplier
The biggest risk is rarely the brand. It is assuming two parts are identical. The same engineering reference warns that Waveshare’s 2.13-inch V2 and V4 use different controllers and that the wrong driver shows nothing, and that similar-looking modules can hide different panel revisions. Good Display’s GDEP073E01 page, meanwhile, lists two different sets of dimensions in its tables when we read it, so take mechanical numbers from the specification PDF rather than the web page.
- The exact panel part number and revision, written into the BOM and the purchase order.
- Whether you will be told before a panel, controller or waveform revision changes.
- Minimum order, lead time and how long the part is expected to stay available.
- Operating and storage temperature for your exact revision, confirmed in writing.
- Warranty terms for commercial use, and what happens with incoming defects.
- The inspection standard used to accept or reject panels at your volume.
- Whether custom waveforms, connectors or cover glass are possible, and at what quantity.
Neither supplier’s pages answered all of these for us, so treat the list as an email to send. Our longer hardware partner checklist covers the same ground for firms building the whole product.
Using both without creating a mess
Plenty of projects touch both catalogs: a Waveshare HAT for the software team while the hardware team lays out a board around a Good Display panel. That works if you treat the prototype as a content and workflow test only. Artwork, dithering, the cloud pipeline and the update schedule carry over. Refresh timing, power draw, connector pinout and color rendering may not, so none of those measurements should go into a product decision until they are repeated on the production panel. Label every prototype with its exact panel part number, so a result from one never gets quoted as a result for the other.
Which should you choose?
- Proving a concept on a Raspberry Pi this week: Waveshare HAT.
- Battery product on ESP32-S3 with a specific Spectra 6 panel: Good Display panel and driver board.
- A handful of finished demo units: compare integrated kits in our Spectra 6 development kit guide first.
- Thousands of units: quote both, ask for the panel part number from each, and qualify samples from the actual production lot.
For the wider field, see Spectra 6 development kits compared. If you are still picking a screen size, read 7.3-inch vs 13.3-inch e-paper, and for the controller choice, ESP32-S3 vs ESP32-C6.
FAQ
Is Good Display better than Waveshare?
For different jobs. Good Display is the stronger starting point when you are designing a product around a specific panel and need its specification, waveform support and a direct supplier conversation. Waveshare is usually quicker for a prototype, because it sells panels with driver HATs and example code for Raspberry Pi, Arduino, Jetson and STM32 on an ordinary product page.
Does Good Display make Waveshare's panels?
We could not confirm that for any specific Waveshare model. One community engineering reference describes Good Display as a large panel OEM whose panels appear in modules from other brands, but it does not say Waveshare's are among them. Ask the seller for the underlying panel part number if it matters to your design.
Which is cheaper, Good Display or Waveshare?
We cannot give a like-for-like answer. Waveshare lists its 7.3-inch Spectra 6 at $57.99 to $77.99 depending on whether the driver HAT is included, and advertises discounts for large quantities. Good Display's product pages we read do not show a usable price, so you need a quote. Compare quotes at your real volume, with the same accessories included.
Can I prototype on Waveshare and manufacture with Good Display?
Yes, but treat it as a port. Connectors, driver boards, initialization code and waveform behavior can differ, so retest image quality, refresh time and power on the production panel. It is usually simpler to prototype on the same panel and board family you intend to ship.
What is the operating temperature of a 7.3-inch Spectra 6 panel?
Good Display lists 0 to 50 °C for the GDEP073E01. Waveshare's manual for its 7.3-inch (E) panel lists 0 to 50 °C in the parameters table but 0 to 40 °C in its FAQ. Get the figure confirmed in writing for your exact part and revision, and design to the lower one until you have.