Writing · Use case
Digital museum labels on e-paper: where they fit in a gallery
E-paper museum labels make sense for text that changes during an exhibition's life: interpretation that curators keep editing, loan and credit lines, sponsor text and multilingual versions. They are battery powered, need no power run, and are read by the gallery light like a printed label. Keep permanent tombstone labels in print and leave video and touch interactives to tablets. The table below sorts what goes where.
Published 2026-11-16. Written for exhibition, collections and visitor-experience teams at museums, galleries and heritage sites. We build battery color e-paper signs on ESP32-S3 and E Ink Spectra 6; where this post describes how our labels behave, it is describing our own hardware and firmware.
Why museums look at digital labels
Printed labels are cheap per sheet but not per change. Every edit means design, proofing, printing, mounting and often a visit to the gallery outside opening hours. Visionect, which sells an e-paper gallery label, cites a survey in its post on e-paper museum labels in which 66% of museums said they print more than 200 labels a year and reported an average of $70 to $100 per label including design and labor. The post does not name the survey, so treat those figures as a vendor’s, but the shape will be familiar to anyone who has reprinted a whole wall because one loan changed.
Tablets solve the change problem and create others: they glow in a dim gallery, need power at the wall, wash out near windows and look like a gadget beside a painting. E-paper sits between the two. It looks like print, holds its image with no power, and can be changed from a browser.
What goes where
| Label | Best medium | Why |
|---|---|---|
| Tombstone label on a permanent collection piece | Printed | Changes rarely; print is cheap, archival and never needs charging |
| Interpretation text in a temporary exhibition | Color e-paper | Rewritten for each show; no reprint when a curator edits a line |
| Multilingual text | Color e-paper, on a schedule or by QR code | One label can rotate languages, or point to a phone page for more |
| Loan, credit line and sponsor text | Color e-paper | Changes with loan agreements and sponsorship, sometimes mid-show |
| Section and wayfinding signs | Color e-paper or print | E-paper when routes change with exhibitions; print when they do not |
| Video, audio and touch interactives | Tablet or LCD | Needs motion and instant response, and is usually plugged in |
The rule: Print what stays for years, put what changes between or during exhibitions on e-paper, and give anything that moves or responds to touch to a screen that is plugged in anyway.
What e-paper gets right in a gallery
- No light of its own: it is read by the room lighting, like a printed label, so it does not add a glowing rectangle to a low-lux room
- Reads well in bright light: near windows and in atriums a reflective panel gets easier to read, where an LCD gets harder
- Holds the image with no power: if the network drops or the battery runs flat, the last text stays on the label instead of going black
- No cables: battery labels mount on a wall, plinth or case without an electrician, which matters in listed and heritage buildings
- Six real colors on Spectra 6: section color codes, brand marks, maps and illustrations, not just black text
Where e-paper labels are the wrong choice
Anything interactive or moving
A full color refresh on Spectra 6 takes roughly 15 to 30 seconds, and a battery label only checks for new content when it wakes. That is fine for interpretation text. It is not a touch kiosk, a video loop or a live feed. Some vendors sell e-paper labels with touch for language selection; ours are display-only, and for “more in your language” we would use a QR code to a phone page.
Reproducing the artwork itself
Six pigments plus dithering make photographs look like a good print, not a calibrated reproduction. Use e-paper for the text, the map and the context image, and do not use it as the reference image of a painting.
Very large or very small labels
Our panels are 7.3 and 13.3 inches. That covers an object label, a section panel or an introduction panel beside a doorway. It is not a wall-sized introduction text, and it is not a small caption on a coin case.
Designing text for an e-paper label
- Write for the panel's native resolution, not for a printer: our 7.3-inch panel is 800 × 480 and the 13.3-inch is 1200 × 1600 portrait
- Use black on white for body text; save red, blue, green and yellow for headings, section codes and small graphics
- Keep body type large enough to read at the viewing distance of the case, and test it on a real panel, not a monitor
- Add a small QR code if you have more text, audio or translations than fit, rather than shrinking the type
- Put a small 'last updated' date somewhere unobtrusive on back-of-house versions, so staff can see a label is current
The Spectra 6 image preparation guide covers the real six-pigment palette, which dither to use for which kind of image, and type sizes that stay sharp.
Mounting, cases and conservation
A battery label is an electronic device in a gallery, so bring the conservator in early. Questions worth answering before you order: will the label sit inside a sealed case or outside it, what fixings are allowed on the wall or plinth, and where will staff take it to recharge? Labels outside the case are easier to reach for charging and keep the battery out of the object’s microclimate. If a label must go inside a case, plan the charging visit around the case-opening schedule.
Every e-paper panel and battery also has a rated operating temperature range. Galleries are usually well inside it, but check unheated rooms, outbuildings and outdoor heritage sites against the panel datasheet before you commit.
Wi-Fi and battery
Our labels use 2.4 GHz Wi-Fi only. Thick walls in older buildings, display cases and metal partitions all cut signal, so survey at the real mounting point. The e-paper sign Wi-Fi checklist covers SSIDs, VLANs and firewall rules for your IT team.
Battery life follows how often a label wakes to check for new content. With a 3,000 mAh cell on our stack, hourly checks last about 40 days and four a day about 7.8 months. Most museum text changes far less often than hourly, so set check-ins from the real edit rhythm. The battery life math has the full table.
A one-exhibition pilot
- Pick one temporary exhibition with frequent text changes, loans or several languages
- List every label in it and mark which ones changed after opening last time
- Measure the ambient light at each label position; e-paper is read by gallery light, not its own
- Decide the label sizes from viewing distance and how much text you really show
- Agree the house style for the panel: type sizes, colors from the six-pigment palette, logo placement
- Survey 2.4 GHz Wi-Fi at each mounting point, including inside cases and behind partitions
- Set check-in times from how often content really changes, then estimate battery life from that
- Run the exhibition, and count reprints avoided, edit turnaround and any label that went stale
If you are also weighing screens, read e-paper vs LCD signage. For boxed alternatives, see Visionect alternatives, and for budgets, what e-paper signage costs. If you run several sites, the multi-location use case covers managing many signs from one account.
FAQ
What is a digital museum label?
A small screen that replaces or sits beside a printed object label and shows text and images the museum can change without reprinting: interpretation, translations, credit lines, loan details or a QR code. E-paper versions are battery powered and reflective, so they look closer to print than a tablet does and need no power run to the wall or plinth.
Is e-paper safe near light-sensitive objects?
E-paper emits no light of its own; you read it by the gallery lighting, like a printed label. That avoids adding a glowing screen to a low-lux room. It does not change your lighting plan: the label still needs enough ambient light to be read, so place it where the existing lighting already reaches.
Can e-paper museum labels show color?
Color e-paper such as E Ink Spectra 6 has six pigment colors (black, white, red, yellow, blue and green). That is enough for brand colors, section color codes, maps and illustrations. Photographs are reproduced with dithering, so they look like a print, not like a phone screen. For accurate reproduction of an artwork, a printed reproduction or a calibrated screen is still the better choice.
How often can a museum label update?
As often as the content changes, but the battery pays for every check. On our ESP32-S3 Wi-Fi stack with a 3,000 mAh cell, hourly check-ins last about 40 days and four a day about 7.8 months. Most labels change between exhibitions or at most daily, so a few check-ins a day is usually plenty.
Do digital labels replace printed labels completely?
Rarely. Permanent identification (object number, accession details on the back of house side, or a tombstone label for a permanent collection piece) is cheaper and more robust in print. Digital labels pay where text rotates: temporary exhibitions, loans, multilingual interpretation, sponsor credits and changing events.
How are the labels updated?
On our stack each label talks to our cloud: it wakes on a schedule, checks whether its image has changed, and downloads the new one if it has. Staff change content in a browser, which dithers each image to the panel's six colors before it is uploaded. Each label's check-in schedule is set per device, so a change shows up at the next wake rather than instantly; plan exhibition openings around that.